Ultralink Network Card UL2 DA User Manual

UltraLink 2  
Quick Start Guide  
UL2-SA (Single Access)  
UL2-DA (Dual Access)  
FRONT  
REAR  
To KVM  
To Computer  
Switch 1 - Power Option switch  
Switch 2 - unit configuration switch  
Located on the side of all models  
(S1 and S2 Off for normal operation)  
To configure the UL 2, the default IP address (192.168.1.42) must be changed to be compatible with  
your network. There are two different ways to configure the UltraLink 2’s network information, using the  
USB ports or a network crossover cable. Following explains both methods.  
1- Unit Configuration via USB ports  
The configuration procedure using USB connections is shown below.  
Computer Requirements  
Dual access model  
connect to lower  
PS/2 ports  
OS – XP or Vista  
2 – USB 2.0 ports  
DO NOT  
Connect the monitor  
HD15 connectors  
PS/2 to USB  
adapters  
CPU Adapter  
Cable  
1. Position Switch 2 on the UltraLink 2 to the ON position  
2. Disconnect unit from the network if connected (computer and monitor should be ON)  
3. Connect the PS/2 to USB adapters to the CPU adapter cable and to the computer’s USB ports.  
4. Connect the PS/2 connectors on the other end of the cable to the UltraLink 2’s PS/2 connectors.  
5. When the keyboard and mouse connectors are connected to the UltraLink 2, the computer  
operating system will detect the UltraLink 2 unit as a removable drive.  
6. Using Windows explorer, select the UL-2 removable drive and you should see a text file name  
“Config.txt”. Edit this text file using a text editor like Notepad and change the IP Address, IP  
NetMask and IP Gateway to the IP address information assigned to the UltraLink 2 unit. Also the  
Unit name, Use DHCP, and Reset Admin Password options can be selected here. Complete  
instructions are included in the “Config.txt” file.  
7. When changes are complete, save the file and close the text editor.  
 
Change the IP address, network mask, and other network information that has been  
assigned to the UltraLink 2. The VNC port (5900) and HTTP Port (80) should only be  
changed if they conflict with existing network settings. If you choose to use DHCP, check  
the box adjacent to “Use DHCP”. When complete “Save” the new IP information.  
NOTE: When the unit is configured properly and connected to the network, if you have  
chosen the option “Use DHCP” the IP address will change to whatever IP address your  
DHCP server assigns it. Once the IP address has been changed, UltraLink 2 will lose the  
connection to the computer used for configuration. Please see the user’s manual for  
additional DHCP information.  
When complete, change the IP information on the computer used to connect to the  
UltraLink 2 back to the original values.  
3- Unit Installation / Cabling  
Single Access Model  
1- Connect the supplied CPU adapter cable from the keyboard,  
monitor, and mouse ports on the UltraLink 2 to the  
corresponding ports on the computer to access.  
2- Connect a standard network cable from the RJ45 connector  
on the UltraLink 2 to your network.  
Dual Access Model  
1- Connect the supplied CPU adapter cable from the keyboard,  
monitor, and mouse ports on the UltraLink 2 (bottom ports) to  
the corresponding ports on the computer to access.  
2- Connect a local keyboard, monitor, and mouse to the  
corresponding ports (top ports) on the UltraLink 2.  
3- Connect a standard network cable from the RJ45  
connector on the UltraLink 2 to your network.  
 
Connecting to a KVM switch  
1- Connect the supplied CPU adapter cable from the  
keyboard, monitor, and mouse ports on the  
UltraLink 2 to the corresponding ports on the  
KVM switch to access.  
2- Dual model only - Connect a local keyboard,  
monitor, and mouse to the corresponding ports on  
the UltraLink 2 (top ports).  
3- Connect a standard network cable from the RJ45  
connector on the UltraLink 2 to your network.  
3- Operating Instructions (Single and Dual access models)  
With all cabling in place, the default IP address changed to be compatible with your network, and power  
applied to the connected computer or switch, access to the connected computer can now be made.  
Connecting to the computer can be made from any computer with access to the network UltraLink 2 is  
connected to. From a network workstation, start internet explorer or other web browser. Type in the  
assigned IP address given to UltraLink 2 in the URL field. The below browser screen will display. Click  
on “Connect using built-in Java VNC Viewer”. This will install a temporary small java applet on the  
connecting computer and then display the remote computers video.  
Click on the “Configure” tab in the upper right corner of the VNC viewer window. This will display  
the configuration options. Click on each tab as needed to change/update the information. Below  
briefly describes each configuration tab.  
User Accounts tab  
Allows you to create and manage up to sixteen separate user accounts, each with separate  
access permissions. Account #1 is the admin account. Enter User name, password. Tick/un-tick  
the Local and Remote options that are appropriate to the user.  
Unit Configuration tab  
Allows you to alter settings within the UltraLink-2. You can define the keyboard, set-up the admin  
account, assign a name to the unit, screensaver time and encryption options  
Time and Date Configuration tab  
Set the time and date, this time stamps the log files  
Network Configuration tab  
(Similar to the initial network configuration)  
Host Configuration tab  
Allows configuration of various details for each host system connected to UltraLink 2. 128 entries  
max, Add host names, Users, Hotkey, and Power Control Sequence.  
Logging and Status tab  
Provides various details about the user activity on the UltraLink 2.  
Return to Host tab  
Exit the configuration menu system and return to the host computer.  
3
10707 Stancliff Road  
Houston, Texas 77099  
Phone: (281) 933-7673  
WWW.ROSE.COM  
UL2-QS rev  
Copyright © 2008 Rose Electronics  
 

Tascam VCR CC 222MKIV User Manual
Tektronix Welding System AFG 5101 User Manual
Toshiba Computer Monitor TR2006R User Manual
Tripp Lite Network Cables A012 012 User Manual
Tripp Lite Network Cables P906 26I User Manual
Vector Portable Generator VEC097 User Manual
VisionTek Credit Card Machine ISO 7811 User Manual
Vulcan Hart Oven VRT32I SERIES User Manual
Wachsmuth Krogmann CRT Television TQ 10 User Manual
Weber Gas Grill 41996 User Manual